Preen is booking, client and payment software for hair, beauty and wellness businesses in Australia. What Preen does.
What counts as a hazardous chemical?
Safe Work Australia says hazardous chemicals are any substance, mixture or article classified under a hazard category in the Globally Harmonized System (GHS) of Classification and Labelling of Chemicals. Australia uses GHS classifications on labels, in registers and in safety data sheets. It does not list hair, nail or beauty products in the pages we read, so don’t assume a product is in or out. Read the label and the SDS. The SDS has the classification, the hazards, first aid and handling information.
What must a business with hazardous chemicals do?
The model code lists the duties in Part 7.1 of the WHS Regulations. The ones that matter most day to day are:
| Duty | What the code says |
|---|---|
| Get the SDS | Obtain the current SDS from the manufacturer, importer or the company that sold you the chemical, and make it readily available to workers. The code says to keep it near the work area, as a hard copy or electronically, and that everyone likely to be exposed must know how to find it. |
| Keep a register | Prepare and keep up to date a register of hazardous chemicals at the workplace: the product names with the current SDS for each. Update it when you bring in a new chemical or stop using one. |
| Label containers | Hazardous chemicals, their containers and any pipework must be correctly labelled. Containers you decant into, and containers of waste, must be labelled correctly too. |
| Train and inform workers | Provide information, training, instruction and supervision. |
| Control exposure | Eliminate risks from hazardous chemicals, or if that is not reasonably practicable minimise them. Make sure exposure standards are not exceeded, and provide health monitoring where it applies. |
| Plan for emergencies | Prepare an emergency plan, and provide fire protection, emergency and safety equipment where the risk calls for it. |
| Manifest | A manifest is a separate, more detailed document needed only where quantities of certain classes of chemical exceed prescribed amounts. It is not the register. |
Safe Work Australia says that until workplace exposure limits come into effect on 1 December 2026, employers and workplaces must continue to comply with the workplace exposure standards for airborne contaminants. Its Hazardous Chemical Information System has been updated to support the change.
What about products that are also sold for home use?
Safe Work Australia lists exceptions to the duty to make SDS easy to access, including a consumer product used in quantities and a manner consistent with household use. The model code adds that if you use a consumer or domestic chemical for its usual purpose, such as washing dishes in the lunchroom, you will not need an SDS. But chemicals that are safe in the home may present greater risks at work depending on how and how much you use, and if you use a domestic chemical in a manner different from normal household use, you should obtain the SDS to work out the risk and the controls. Safe Work Australia also says you may still offer an SDS in these circumstances as part of your duty to keep workers safe.
The pages do not say how this applies to professional hair, nail or skin products used all day. If you are unsure, ask your WHS regulator, and keep the SDS if the product has one.
What can a hazardous chemicals register look like?
The code only requires the product name and the current SDS. The other columns below are our suggestions, to make the register useful on the floor. Anything in brackets is yours to fill in.
| Column | Example entry | Why |
|---|---|---|
| Product name | [Product name as on the label] | Required: the code says the register lists the product names. |
| Manufacturer or importer | [Name from the label] | Our suggestion: it tells you who to ask for an updated SDS. |
| SDS date or version | [Date or version shown on the SDS] | Our suggestion: it lets you see whether you hold the current one. |
| Where the SDS is kept | [Folder or file location] | The code says workers must know how to find it. |
| Where the product is stored and used | [Cupboard, basin area, treatment room] | Our suggestion. |
| Decanted or diluted into other containers | [Yes or no, and how the container is labelled] | The code says decanted containers must be labelled correctly. |
| Date added or removed | [Date] | The code says to update the register when a chemical is introduced or discontinued. |
Do the rules differ by state?
Safe Work Australia says the model WHS laws have been implemented in all jurisdictions except Victoria, and that some jurisdictions have made variations. It says a model code of practice only has legal effect where it has been approved there, so check your regulator. It does not publish a state-by-state table of differences on the pages we read, so we don’t give one. If someone is exposed to or hurt by a chemical, see what to record and what to notify and our guide to first aid kit requirements.
Questions people ask
Do I need a safety data sheet for every product in my salon?
For each hazardous chemical you use, handle or store, yes. Safe Work Australia says the exceptions include chemicals in transit, a retailer that intends to sell a consumer product without opening it on the premises, and a consumer product used in quantities and a manner consistent with household use. The code adds that a household chemical used differently, or in larger quantities, than at home should have its SDS obtained.
Where do I get a safety data sheet?
From the manufacturer's website, or by asking the manufacturer, the company that sold it to you, or the importer. Safe Work Australia says you will get an SDS when you are first supplied with the chemical, and the first time you are supplied after the SDS has changed.
What is a hazardous chemicals register?
The model code says it is a list of the product names of all hazardous chemicals used, handled or stored at the workplace, with the current SDS for each. It must be kept up to date and be readily accessible to workers who use, handle or store the chemicals and to anyone else likely to be affected.
Do I need to label bottles I pour products into?
The code says containers that have had chemicals transferred into them in the workplace, and containers of chemical wastes, must be labelled correctly. If you find a container with an unknown or missing label, it must be correctly labelled; if the contents are unknown, mark it clearly, for example 'Caution, do not use: unknown substance', and store it separately until it is identified.
How often does an SDS need to be updated?
Safe Work Australia says manufacturers and importers must check the SDS at least every 5 years. As a user, you keep the current one in your register and get a new one when the product's SDS changes.
Sources
- Safe Work Australia: Hazardous chemicals, Overview (no date shown, read 28 October 2026)
- Safe Work Australia: Using safety data sheets (no date shown, read 28 October 2026)
- Safe Work Australia: Model Code of Practice, Managing risks of hazardous chemicals in the workplace (published 24 February 2021, last updated 16 June 2023, read 28 October 2026)
- Safe Work Australia: Model WHS laws (no date shown, read 28 October 2026)
General information, not legal advice. This describes the model WHS laws and model code. Safe Work Australia says the model laws have been implemented in all jurisdictions except Victoria, that some jurisdictions have made variations, and that a model code only has legal effect where it has been approved in that jurisdiction. It is not a regulator. Check with your state or territory WHS regulator. Checked 28 October 2026.